ACE 7450 UNIVERSAL Reynolds and Reynolds *Refurbished Finance and Insurance Forms Flat Bed Dot Matrix Printer

ACE 7450 UNIVERSAL Reynolds and Reynolds *Refurbished Finance and Insurance Forms Flat Bed Dot Matrix Printer

ACE Part # 130083.3 F&I Firmware is Compatible With: Reynolds & Reynolds, docuPad DMV Barcode Forms, Dealertrack, Dealerbuilt, Automate, Autosoft, MPK and most other Dealership Management Systems

Includes One-YEAR ACE Warranty - No Monthly Maintenance!
Ribbon - Power Cord - *NEW with USB, NIC and Serial Connectivity

The ACE 7450 UNIVERSAL Finance and Insurance Forms Printer

Includes: ACE F&I Firmware for Reynolds & Reynolds, Dealertrack, Dealerbuilt, Automate, MPK and most other Dealership Management Systems(One Printer for Multiple Systems)
Hardwired for Hard Jobs
Handles up to 7 part forms
Prints cut sheet forms up to 37" in length
24-pin printhead, up to 600 cps print speed
Extra long ribbon life
Clean hands ribbon installation

Fully Automated for Efficient Operation
Automatic form loading and parking
Automatic form thickness detection
Automatic interface switching
Left and right edge paper sensing

Advanced Technology to Make Jobs Easier
Large viewing window
Easy to use control panel with graphical display
Audible forms loading signal

ACE 7450

Print Head Duty Cycle increased by 200 million stroke/pin

Ribbon life increased by 5 million characters

NEW Interfaces: USB, NIC and Serial

7450 Standard Front and rear paper paths, cut sheet

*Denotes model differences from the AMT 7350

Method: Serial Impact dot-matrix, bi-directional andlogic seeking
Speed: High Speed Draft 600 cps (15 cpi) High Speed Draft 400 cps (10cpi) Draft 300 cps (10 cpi) Letter-Quality 150 cps (10 cpi)
Pitches (cpi): 10, 12, 15, 17, 20 24 and Proportional
Line Feed Speed: 6 inches per second
Fonts: High-speed draft, Draft, Roman, Sans Serif, Courier, Prestige,Script, Gothic, OCR-A, OCR-B,Orator and Orator-S
Graphics: Up to 360V x 360H
Print Width: 136 columns (10 cpi)
Printhead: Number of pins 24
Dot Diameter: 0.010 inch (0.25 millimeter)
Head Life: 500 millionstroke/pin (Draft)
Operator Panel: Graphic LCD, Paper path lever, Gap adjust lever, 5 UserDefined Profiles, Quick Access Setup Menu
Bar Codes: Code 3 of 9, Interleaved 2 of 5, Code 128, UPC-A, UPC-E, EAN-13,EAN-8, Codabar, and POSTNET™
Buffer: 64 K Bytes
Ribbon Life: 20million characters
Options: Automatic cut sheet feeder, Ethernet interface

Firmware:
ACE Part # 130083.3 F&I Firmware: Reynolds & Reynolds, docuPadDMV Barcode Forms, Dealertrack, Dealerbuilt, Automate, Autosoft, MPK and most other DealershipManagement Systems

Interfaces:USB, NIC and EIARS-232-C serial with automatic port switching
Paper Handling: Fanfold paper - front push tractor
Paper: width 8 - 15"
Paper: weight 16 - 24 lbs
Label thickness: .003 - .007"
Fanfold forms: Rear push tractor
Paper width: 8 - 15"
Paper thickness: Original + 6 copies
Cut Sheet: Manual front feed
Paper width: Min 3"- 16.9" max
Paper length: Minimum 7.2"- 37" max
Paper thickness: Original + 6 copies

Physical:
Height 11.6 in. (294 mm)
Width 25 in. (635 mm)
Depth 18.3 in. (465 mm)
Weight 52 lbs. (23.5 kg)
Electrical:
Power 90-130 v 47-63 Hz
Noise:
58 dBA (LQ mode)
Certifications:
UL & C-UL Listed, FCC Class B
MTBF: 10,000 hours @ 25% duty cycle
Warranty: One year ACE Solutions parts and labor, return to Depot Warranty

• Front and rear tractor paths

• Forms on demand

• No forms waste

• Paper out and jam sensing

• Remote paper source selection

Firmware Compatible with: Reynolds & Reynolds, Dealertrack, Dealerbuilt, AutoMate, Autosoft, MPK and many other DMS's